Setting up Rezi Screenz

Setting up Rezi Screenz

This guide will show you how to set up Rezi Screenz using an Amazon Fire stick.
It is a customer interactive window solution enabling 24/7 advertising that your customers can engage with and take control of. Rezi Screenz can update the window displays allowing lead generation even when your office may be closed.
To enable Rezi Screenz you will need a Rezi account and an Amazon account.

Requirements
  1. You will need to purchase an Amazon Fire Stick. You can find the compatibale devise here: https://www.amazon.co.uk/dp/B01ETRIFOW
  2. An Amazon account to set up the Fire Stick. This is a free account. It will require a credit card to set up but there are no monthly subscriptions.
  3. A TV Supporting HDMI at 720p or above.
  4. A WIFI Network and Password.
  5. A Rezi username and password.

Make sure you purchase a Fire Stick and not an Amazon Dot or Echo. The software navigation requires a Fire Stick remote.

First use
The first time you use your Fire Stick there will be some set up steps. Plug in the Fire TV Stick to your TV HDMI Port and a power source; this can be a plug or a USB port on the back of your TV. At this stage please also make sure the remote has charged batteries in it.



Power on your TV and Navigate to the HDMI source that you have plugged your Fire TV Stick into. This is normally found via the TV’s menu under “Source” or “Input”. This may vary for your TV. Once here you will be presented with a screen as below and asked to connect your Fire TV Stick to your WIFI. You should see the name of your WIFI network displayed; if you do not you may be out of range of your WIFI router. Follow the instructions, connecting to wifi you may need to enter your Wifi password.

Once you are connected you will be asked to register an account or create a new one. If you have previously created an Amazon account enter these details here or simply create a new one now.













Setting up Rezi Screenz Software
Now that you have your Fire Stick Installed you can download the Screenz application.
Navigate to the app menu on your Fire Stick and the 'Finance' category. Here you should be able to locate the 'Rezi Screenz" app. Click Download.
Once this is installed you will see the Rezi Screenz app on your homepage Click to open the app and you will see the following page.



Click 'Authenticate' and here you will be asked to enter your Rezi details. Once you have entered these details you will be logged into Screenz and will be presented with the following page. You will now need to configure your Rezi Screenz. We have supplied templates and set up options.



To use your Screenz, you will need to configure some settings. In display settings you can chose your Display name and Brand. This menu will also allow you to give control to 'Passers by' which is a huge party of the software functionality.



Once you are happy with your display settings, navigate to the 'Property Search' settings. Here you can control which properties are displayed and the order they are displayed in. . Finally select your 'Remote settings' to configure. These allow you to set permissions to take control of the Screenz carousel by potential clients.

     
This section is important to note as it controls who may access what parts of the software and for how long.
Options:
“Timeout Users After How Many Seconds Of Inactivity” : This will enable you to set a time out feature due to inactivity on a customers device. The user will be given an alert on their screen before they are timed out due to inactivity. It is important to set this so that a user does not remain connected once they have stopped looking through your properties.
“Warn User Before Timeout Is Up” : As described above this allows you to adjust the time of the inactivity alert. This is something to carefully consider; if you set a time out interval of “30s” and an alert of “20s” to go, this would result in the alert activating every “10s” of inactivity.
“Url to navigate to when user has finished” –  Once someone has been using the remote-control settings on their mobile, and they click disconnect it will close the app, and then re-direct them to a website. By default, this setting will navigate to the Dezrez website. However, you could enter the URL for the property page on your website. 
Follow Up Email
The Follow up email is sent to the user when they leave the app, showing any details of the properties they have liked while in control. This appears like a mail out you would perform from Rezi itself. The important setting to configure here is the “From Address” and “From Name” to direct replies.
To start your property slideshow
Navigate back to your main menu and select 'Start display'. Your screens should now be up and running.
Additional information
Rezi Screenz Stickers can be found in the display settings under 'Unique ID'. You can order stickers with a unique way for your customers to take control of your interactive display. They can simply hold an NFC enabled smart phone up to the stickers and start interacting with the screen. Navigate to the settings menu and choose the top Display settings options. FInd the setting for 'Unique ID' on this list and click into it.

You will then be presented with a pop up. Make a note of the ID and click 'order' in the bottom right of the screen to order your sticker. When you receive your sticker, make sure you match it to the correct display in your agency if you have multiple displays setup. This is done by matching the ID printed on the sticker to the ID you noted earlier.

Custom Branding* charges apply
As part of the Rezi Screenz Software, you are able to customize the look of the slideshow and remote. This is done by changing the “Configuration File” under the Display settings, and Remote settings. To order your custom branding, you would need to contact the branding team on: templates@ dezrez.com. You can do this from your Screenz home page, selecting the “Customize” button will display the below pop up, then you just need to select “Call back” and our branding team will be in touch. Alternatively, you can raise a request via your My dezrez account at: my.dezrez.co.uk